Denver Radon Testing

If you need a Denver radon test you have a couple of ways to go about it. You can buy a simple radon test kit from certain stores and maybe hardware stores in your area. You also can get radon test kits online and some states give them out free radon test kits in certain areas.

If you live in a area known for radon gas i would suggest a radon testing service. You can find radon testing services in phone book or on internet. Some will use a radon detector i would also have radon test kits to make sure results are correct.

If you live in area not known for radon gas go with the cheap Denver radon test and do it yourself. They have mutiple test kits some as low as $5 and up to $45 per test kit. Place one near sump pump and one in other corner of basement. I would not put any radon test near furnace or clothes dryer as results might be incorrect.

A Denver radon test for do it yourself is cheap and simple. Takes from 3 to 14 days and depends on radon test kit. You then send radon test to lab and they mail results back. If levels are high hire a radon testing service to check results and tell you best method to deal with radon gas.

If no radon problems are known to be in your area use cheap radon test. If you live in area with known radon gas problems hire radon test service. I would radon test home with cheap test kit and if i see high levels of radon hire radon test services.

You can do it either way but i preffer cheap radon test before i pay more money for radon test services.

Protect Your Family From Radon Gas

Radon gas is an invisible, odorless gas emitted by uranium decaying underground. Harmless outdoors, radon can seep into your home through the ground and accumulate: at high concentrations, this radiation can be extremely dangerous. In fact, radon gas is the leading cause of lung cancer in nonsmokers and the second leading cause in smokers. Protect your home and family from this unseen menace with radon testing and, if necessary, radon mitigation.

Radon Testing

Radon testing is an easy, straightforward process. A charcoal canister is used to collect radon gas from your home, usually over the course of approximately 48 hours. During the radon testing period, it's important to keep all doors and windows closed for the most precise readings. At the conclusion of the testing period, the canister is sent to a lab to measure the accumulated radon concentration. Simple as that. Do-it-yourself kits are readily available, although you may want to consider having a professional administer your test for optimal accuracy. Because your test results will be the basis of future action (either none because levels appear safe or an expensive radon mitigation) it's important to have the best readings possible. That way you'll be able to make an informed decision about what the next steps should be.

Radon Mitigation

If your test does report unsafe levels of radon, you need to address the problem ASAP. You'll need to contact your local specialist: They will be able to design and install the right radon reduction system for your home. Depending on the construction of your home, there are several different options. The most common are sub-slab depressurization (for homes with basements) and sub-membrane depressurization (for homes with crawlspaces).

Sub-slab depressurization entails drilling a small hole in the floor of the foundation slab and excavating a slight cavity below. Then, a pump is connected to the hole and the radon (and any other organic contaminants) is vacuumed out of the ground before it has a chance to leak into your home. These gases are vented outside, where the radon can disperse harmlessly. Sub-membrane depressurization is similar to sub-slab depressurization, but because there is no slab, a membrane is installed over the floor of the crawlspace to trap the radon. The gas is extracted in a similar fashion and vented outside.

Because radon mitigation is not a one-size-fits-all process, this really is not a job for DIYers; from targeting the entry point to creating a complete seal, professionals have the knowledge, expertise, and skill to ensure your family will be safe.

Radon Resistant New Construction

If you live in an area with a known radon problem and are building a new home, you may want to consider radon resistant construction. These preemptive measures prevent the radon from ever entering your home, stopping the problem before it begins! The techniques are the same as for mitigation, but because your home is not being retrofitted the system can be more efficient as well as unobtrusive. For example, vent stacks are installed internally as the building is constructed, hiding this potential eyesore while still completely venting any radon gas. Talk to your contractor about whether radon resistant new construction is needed for your house.

Just like your home isn't safe without working smoke detectors, if you haven't tested for radon you're taking a risk! Let professional radon contractors bring you safety and peace of mind with complete radon testing and mitigation. If you're looking for a trustworthy technician in your area, organizations like the American Association of Radon Specialists and Technologists (AARST) and the National Environmental Health Association (NEHA) can help you find a qualified professional.

Matt Gallo is a home improvement specialist and the Internet marketing manager for Prospect Genius, a leading provider of online, local advertising solutions.

Article Source: http://EzineArticles.com/?expert=Matt_Gallo

Planning For Radon Mitigation in Your New Home

The prevalence of Radon Gas in the soils in areas around the United States is an issue of growing concern. Radon has been deemed the number 1 cause of lung cancer in non-smokers in a study done at the University of Iowa.

If your planned home is in an area of higher risk, you should plan early on to install a Radon Mitigation System. In many areas now, a test is required with each real-estate transaction regarding residential properties and this will probably expand to include most of the higher risk areas. In any event, your health is well worth the small investment to install such a system.

Installing the basics of the system in a Basement or Slab-On-Grade Foundation consists of inserting a perforated pipe below the slab in crushed rock and stubbing up a connector into the basement. Venting this pipe to the exterior (away from any windows in your house or your neighbors, preferably up through the roof), constitutes what is known as a Passive Radon Mitigation System. If , after your house is complete, a test determines that levels are still too high, you may have to convert to an Active Radon Mitigation System by installing a fan than runs continuously which creates low pressure under the slab and increases the rate of gas evacuation. So you will want to have the slab penetration in an area that is readily accessible and has electric available to power the fan.

Radon gas is found in varying levels in almost all regions of the country. Visit the EPA's Radon Map Zone at the following link.

Radon Map Zone Areas in Pink pose the highest risk followed by Orange and Yellow. Click here to check the specific risk level in your county.

Many times the fan is located in the attic, particularly if your foundation is slab-on-grade or crawl space. Also remember that you will want to make sure that the vent through the roof does not allow water to fall down the pipe to the slab below, this would not be a good thing for several reasons.

Designing and installing the infrastructure for a passive system can be accomplished for about $150 to $300. this will save you 150-300% of the cost of retrofitting. An Active systems will add $ 250-$550 depending on the size of your home. Download Build Radon Out. Your radon system is a simple task but it does require planning to complete the installation in your new home without incurring significantly higher costs.

Article Source: http://EzineArticles.com/?expert=Randy_Covington

Planning For Radon Mitigation In Your New Home

The prevalence of Radon Gas in the soils in areas around the United States is an issue of growing concern. Radon has been deemed the number 1 cause of lung cancer in non-smokers in a study done at the University of Iowa. Radon gas is found in varying levels in almost all regions of the country. Visit the EPA's Radon Map Zone at the following link.

Radon Map Zone Areas in Pink pose the highest risk followed by Orange and Yellow. Click here to check the specific risk level in your county.

If your planned home is in an area of higher risk, you should plan early on to install a Radon Mitigation System. In many areas now, a test is required with each real-estate transaction regarding residential properties and this will probably expand to include most of the higher risk areas. In any event, your health is well worth the small investment to install such a system.

Installing the basics of the system in a Basement or Slab-On-Grade Foundation consists of inserting a perforated pipe below the slab in crushed rock and stubbing up a connector into the basement. Venting this pipe to the exterior (away from any windows in your house or your neighbors, preferably up through the roof), contitutes what is known as a Passive Radon Mitigation System. If , after your house is complete, a test determines that levels are still too high, you may have to convert to an Active Radon Mitigation System by installing a fan than runs continuously which creates low pressure under the slab and increases the rate of gas evacuation. So you will want to have the slab penetration in an area that is readily accessible and has electric available to power the fan.

Many times the fan is located in the attic, particularly if your foundation is slab-on-grade or crawl space. Also remember that you will want to make sure that the vent through the roof does not allow water to fall down the pipe to the slab below, this would not be a good thing for several reasons.

Designing and installing the infrastructure for a passive system can be accomplished for about $150 to $300. this will save you 150-300% of the cost of retrofitting. An Active systems will add $ 250-$550 depending on the size of your home. Download Build Radon Out; a guide on the design and construction of Radon Mitigation Systems and 'Model Standards and Techniques for Control of Radon Gas'.

Checklist for Consumers

(Source: NEHA-NRPP.org)

The EPA publishes a number of informative documents about radon for consumers. Many of the radon related booklets are available through the EPA’s website (www.epa.gov/radon/pubs) or through state radon offices.The EPA’s Consumer’s Guide to Radon Reduction provides guidelines for radon mitigation.The Home Buyer’s and Seller’s Guide to Radon http://www.epa.gov/radon/pubs/hmbyguid.html includes the following guidelines regarding radon measurements:Radon Testing Checklist
For reliable test results, follow this Radon Testing Checklist carefully. Testing for radon is not complicated. Improper testing may yield inaccurate results and require another test. Disturbing or interfering with the test device, or with closed-house conditions, may invalidate the test results and is illegal in some states. If the seller or qualified tester cannot confirm that all items have been completed, take another test.

Before Conducting a Radon Test:

• Notify the occupants of the importance of proper testing conditions. Give the occupants written instructions or a copy of this Guide and explain the directions carefully.
• When doing a short-term test ranging from 2-4 days, it is important to maintain closed-house conditions for at least 12 hours before the beginning of the test and during the entire test period.
• When doing a short-term test ranging from 4-7 days, EPA recommends that closed-house conditions be maintained.
• If you conduct the test yourself, use a qualified radon measurement device and follow the laboratory's instructions. Your state or county extension office may be able to provide you with a list of do-it-yourself test devices available from qualified laboratories.
• If you hire someone to do the test, hire only a qualified individual. Some states issue photo identification (ID) cards; ask to see it. The tester's ID number, if available, should be included or noted in the test report. NEHA-NRPP provides laminated ID cards to its certified individuals.
• The test should include method(s) to prevent or detect interference with testing conditions or with the testing device itself.
• If the house has an active radon-reduction system, make sure the vent fan is operating properly. If the fan is not operating properly, have it (or ask to have it) repaired and then test.
• Closed-house conditions means keeping all windows closed, keeping doors closed except for normal entry and exit, and not operating fans or other machines which bring in air from outside. Fans that are part of a radon-reduction system or small exhaust fans operating for only short periods of time may run during the test.

During a Radon Test:

• Maintain closed-house conditions during he entire time of a short term test, especially for tests shorter than one week in length.
• Operate the home's heating and cooling systems normally during the test. For tests lasting less than one week, operate only air-conditioning units which recirculate interior air.
• Do not disturb the test device at any time during the test.
• If a radon-reduction system is in place, make sure the system is working properly and will be in operation during the entire radon test.

After a Radon Test:

• If you conduct the test yourself, be sure to promptly return the test device to the laboratory. Be sure to complete the required information, including start and stop times, test location, etc.
• If an elevated level is found, fix the home. Contact a qualified radon mitigation company about lowering the radon level. EPA recommends that you fix the home when the radon level is 4 pCi/L or more.
• Be sure that you or the radon tester can demonstrate or provide information to ensure that the testing conditions were not violated during the testing period.

Radon & Lung Cancer

Radiation is called the "complete carcinogen" because, unlike chemical carcinogens, it alone can initiate, promote and propagate cancer. The primary site of radioactive exposure to most people is their home. The average person receives a higher radiation dose from radon at home than from all other natural or man-made sources combined.

Radon is a proven and very potent "Class A" carcinogen. Safety limits on toxins or carcinogens in food or water are set at levels thousand times less lethal than what is the risk from radon in an average American home. "Radon in residential homes causes more deaths than fires, drowning and airplane crashes combined." (EPA)
The lung cancer crisis

After smoking, "radon is the second leading cause of lung cancer." (Surgeon General) Among non-smokers, radon is the No. 1 cause of lung cancer deaths beating out second hand smoking.
Lung cancer is the leading cancer killer of all Americans, both men and women, claiming 160,000 lives every year - more than breast cancer, prostate cancer, and colorectal cancer combined. Over 171,000 cases of new lung cancers are diagnosed in the U.S. each year.

The leading three causes of cancer deaths Men & Women:

Lung cancer 33% Lung cancer 24%
Prostate cancer 12% Breast cancer 18%
Colorectal cancer 10% Colorectal cancer 11%

Lung cancer is the deadliest of all cancers – its 5-year survival rate is only 10 to 14 percent. By the time people develop symptoms (shortness of breath, coughing, bloody sputum), the cancer has grown to the size of an orange or has spread to other organs. While the death rates for many types of cancer have been declining during the last 60 years, the age-adjusted incidence and mortality rates for lung cancer have been rising.

There is a lung cancer crisis, particularly among women. Lung cancer deaths have increased by 20% among men during the past two decades but by 150% among women, and in the 1990's alone, lung cancer deaths of white females have increased 60%.

Radon 2nd Leading Cause of Lung Cancer

(Source: Robin Meyer)

Radon is responsible for at least 15,000 to 20,000 getting lung cancer deaths each year in the U.S. In fact, radon exposure is the second-leading cause of lung cancer in the United States. This tragedy is compounded by the fact that both radon testing and radon mitigation are simple and inexpensive. While nationally 1 in 15 homes may show dangerous levels of radon, the average levels in many parts of the mid-Atlantic may be two to three times higher than this. There are no immediate symptoms of radon exposure and you cannot see, taste, feel, or smell radon. Cancer can show up five to 25 years after exposure and about 12% of lung cancer diagnoses are caused by radon.

Where Radon Comes From

Radon is a radioactive gas that occurs naturally in the soil. It is a byproduct of uranium decay. Radon can be found in-new homes, older homes, homes in need of repair, homes without basements; there is no pattern. Your neighbor's home might be radon-free, while your home has dangerous levels. Radon can come from the ground beneath a home, well water, and various building materials. The only way to know is to test your home, which can be done for less than $30 with a simple kit available at most hardware stores.

Before Buying a Home:


Ask the seller for a copy of the home's radon test results. If the home has not been tested, ask your home inspector to include a radon test in his report.
Make sure that the Radon Testing Checklist items were met.
Make sure that the last test was recent, at least within the past 2 years.
Make sure that the seller has performed the test in the lowest, livable level of the house. This usually means the basement, but if the home has no basement, test in the lowest level of the house.
Ask that the home be tested again if any changes have been made to the home's heating, ventilation, and air conditioning system since the last test was done.
Should you decide to renovate an unfinished part of the home, test for radon before work begins. It is much easier to install a radon system in an unfinished room. If your test results are close to the EPA action level (4.0 pCi/l), test the space again after work is completed.
When renovating an unfinished part of a home or building a new home, look to minimize radon presence.

To Minimize Radon When Building a New Home:

• The integrity of the slab should be maintained at all times.
• Sump pits need to be installed with a sealed cover.
• Use a gas tight radon drain for all floor drains.
• When framing, run a radon vent pipe from the basement to the high part of the attic. This pipe should not be to close to the attic eaves, so that a radon fan can be easily added at a later date if needed.
• If a sump pump is not required for the basement or if the construction is slab on grade, have drain tile looped around the perimeter of the inside of the foundation and have it terminate with a 3 inch PVC "rough in." A 3" PVC vent pipe is sufficient for spaces that are less than 2,000 square feet. Use a 4" PVC "rough in" and a 4" PVC vent pipe for spaces larger than 2,000 square feet.
  

How to Measure Radon

Homeowners can test for radon themselves. Order a radon test kit and when finished, make sure to return the radon test to the laboratory with all the required information filled out. Be sure to follow the test kit instructions to the letter. One of the most common mistakes is over or under exposing the devices. A radon test result of 4 picocuries (a picocurie is one trillionth of a curie and measures radioactivity) per liter or higher is considered to be a high radon level. The average radon level in homes is 1.3pCi/L and .4pCi/L outdoors. The 1.3 pCi/l national average includes homes in many regions that do not have radon issues. Keep in mind that the 4.0 pCi/l standard was established as a matter of practicality, not safety. EPA officials at the time were unsure whether the technology and methods employed in 1984 were capable of reducing radon levels further. Recent studies show a significant risk of lung cancer when exposed at levels between 2 and 4 pCi/l. EPA recommends reducing radon levels to below 2pCi/l if possible.

If your home does have Radon

Costs to hire a radon removal professional to lower radon levels average about $800 to $1,200. Homes with crawl spaces or without gravel under the slab cost more. Many radon removal configurations exist and include sub slab depressurization (SSD), SSD with a crawl space, and air exchangers. The work required for a successful radon mitigation are beyond the skills of most untrained homeowners.

What to Consider When Hiring a Radon Abatement or Mitigation Firm

• Ask to see proof of their certifications from National Environmental Health Association (NEHA) and/or the National Radon Safety Board (NRSB).
• Contractors must also be licensed as home-improvement contactors in each state they wish to work. The District of Columbia is an exception in the case of radon work.
• Make sure the contractor is fully insured.
• Have them describe all of the work they will be doing.
• Sign a contract and see that it includes all promises that were made verbally.
• Don't pay for work until it is complete. Down payments are rarely required.
  Ask for at least a 20-year transferable warranty.
  

Radon Abatement Services is a radon mitigation contractor serving the greater Maryland, DC, and Virginia region. Contact them online for help with lowering radon levels. Call 301-718-6200 or visit their website at http:// http://www.radonrepair.com/ for more information.

Fore more Radon Articles

Colorado Radon Testing

It's quite encouraging that more and more people are taking radon gas testing more serious. Maybe the agony it has caused many is the main source of this awareness. Nevertheless, we should not take chances when it comes to this gas and actually we should ensure that the test is done in our homes either by professionals or doing it ourselves with a home test kit.

Even though the home test kits are helpful, we definitely need the help of a special laboratory for analyzing the results of the test. One thing that is noticeable is that the levels of this gas can change depending on the weather. For instance, in winter the levels tend to be much higher while in summer the levels are quite lower. Nevertheless, if you live in a house that is third floor and upwards, then the risks are quite minimal.

When it comes to radon testing, devices that require longer periods of time in testing are more reliable and accurate. The reasoning behind this is that, radon levels change depending on the seasons and thus this devices that are long-term are able to get the average gas value of different seasons. Nevertheless, the minimum time that you need to expose the kit may carry depending on the device that you have.

On windy and stormy days Colorado radon testing might not be reliable and thus it's advisable for one to check the weather forecast before carrying out the test. However, if you prefer to go for short-term testing, then you should ensure that you keep all the windows and doors closed for about twelve hours before you start the test. This way, you'll be able to get accurate results.

More Articles about Radon Testing

Denver Radon Test

Radon can be very devastating. In fact, living without being sure of radon levels in your house is quite risky. Therefore, to get clear analysis on the levels of this gas, you'll definitely need a radon test kit. This kits are available from National safety council, and they come in low prices that even cover lab analysis and postage costs.

A radon test kit will normally be accompanied by instructions on how to go about while measuring. Afterwords, the kit is sent to the laboratory for analysis and depending on the complexity of the test, the period within which you'll get the results may vary. Where exactly will you place your kit? Well, even though it may be provided for in the instructions, it's better if you placed on the lowest part of the house e.g the basement. Such places as the bathroom, kitchen, hallway or the laundry room have high moisture levels and will tamper with the accuracy of the results.

If your living room, bedroom or the study are located in the ground floor, then this are the areas that should be tested first. However, make sure that you or anyone else does not move the kit when in sampling process. Generally the kits are found in variety of types and thus you should specify the type you're interested in while making the order. You can either buy online or order one trough the phone.

Normally, the gas levels will vary from time to time and thus you should use the radon test kit as often. However, in case you change the ventilation systems, you renovate the house or there are earthquakes and so on, then you should test for radon levels again.

A2ZRadon Mitigation is Denver radon removal company. They help home owners lower the radon levels below 4.0. For More Information on Radon test kit, Visit His Site at RADON TEST KIT. You Can Also Add Your Views About Radon test kit At My Blog here RADON TEST KIT

Radon Mitigation - Fixing a Radon Problem the Right Way

What needs to be done?

If a home's radon level is 4 picocuries per liter or more, the EPA recommends a radon mitigation system (sometimes called radon remediation) to be installed.

A common method utilized to reduce the radon level is "sub slab depressurization". In this case, a suction point or points are determined and a pipe is inserted through the concrete slab floor. This pipe is connected to other PVC piping and a fan is positioned on the pipe outside the living area. The fan then draws the radon gas from beneath the home and vents it to the outside. A radon mitigation system can cost between $900-$2500.

Choosing a Radon Mitigation Company

A qualified radon mitigation company is your best choice for installation of a radon mitigation system.

In many states, these companies or individuals are certified by a state regulatory agency such as the DEP (Department of Environmental Protection). If this is not true in your state, then you should look for a qualified mitigator who is NEHA (National Environmental Health Association) certified. When choosing a radon mitigation company, you should ask for their state or NEHA certification number, if they offer free estimates, and a warranty on the system.

Typically, the mitigation company will visit the home to determine the best configuration of the system and the size of the fan for the type of foundation the house is built on. An estimate of cost for a system can then be determined. After choosing the contractor, plan on 1-2 days for installation.

As always, beware of the lowest bidder. Check for references, job examples, and the amount of time the contractor has been in business.

Life After Radon Mitigation

It is recommended that a radon mitigation system be tested after installation. A test may be performed after the system has been operational for 24 hours or more. A short-term test is usually used for the initial test. In some cases, the estimate given by the contractor may include the retest by a professional company or radon test kits.

A follow-up test is suggested every year to monitor the system's continued effectiveness.

Arick Amspacker is a certified radon technician and home inspector. Over the years he has taught continuing education courses for Realtors and many first time home buyers seminars, as well as a Community College course on inspections and radon. His website http://www.homeradontest.com sells various types of inexpensive, easy to use radon testing devices, and http://www.radonreporter.com offers a resource for radon information.

Denver Radon Mitigation System

If you've done a radon test and the results came back showing that the level is higher than 4 PCi/L, then you definitely need to install a radon mitigation system. Usually this system keeps the gas concentration to lower levels that cannot be harmful. In fact, it lowers the levels up to 2 PCi/L. Interestingly, If you later decide to sell the house installed with this system, the price will be definitely tangible.

Basically, it would be best to inquire from an expert opinion before installing any radon mitigation system. However, if you choose not to, then you ought to consider certain criteria. For instance, the type of foundation and the design of the house. Here you'll find that there are houses that have a simple space under the first floor, some with concrete-poured on the ground level, some that combine these two foundation designs, others with a crawl space and half a slab-on-grade etc.

Whichever the design of your house, there are several procedures that may be required to achieve radon mitigation. Generally, you can opt for prevention by using special devices that may prevent radon from entering the house or you can choose to lower the gas concentration. Installing underground fans, radon contractors, sealing cracks and openings in the walls etc, are some of the measures you can undertake to control of the radon.

Such things as the soil type beneath the house, foundation design and so on, are some of the special diagnostic tests that should be done before you start on the radon process. Nevertheless, it would be better and wise to talk to the team in charge of the whole procedure and analyze every detail together.
If you need a radon test in Denver or you are interested in hearing more about Denver radon mitigation, give A2Z Radon Mitigation a call: (303) 832-9218 or check out their website http://www.a2zradon.com/ . A2Z Radon Mitigation specialize in installing radon mitigation systems and radon removal.

More on Radon Testing

Should You Test for Radon?

(Source: Chris Robertson)

Most people don't think much about Radon, and yet Radon can have a major impact on their health and that of their families. That's because Radon can seep into homes and contaminate the air inside. That's a major reason for concern as Radon is a major cause of lung cancer, second only after cigarette smoking. In fact, the US Environmental Protection Agency estimates that there are over 20,000 deaths in the United States every year due to exposure to Radon. How are we getting exposed to Radon, and what can a homeowner do about it?

Radon is a gas that is formed naturally when uranium in rock, soil and groundwater breaks down. The Radon gas then finds its way up to the surface. Unlike other forms of pollution or dangerous gasses, you can neither see nor smell Radon. Most of the time, Radon harmlessly dissipates into the atmosphere outdoors, as it has for millions of years, and it isn't a problem at all. It does become a problem when it finds its way into your house. How can that happen?
In many ways. What happens is that the Radon gas in the soil under your home collects in the void and air spaces under the foundation slab and gradually enters the home. It can also enter through cracks in foundations or even through showers and drainage sumps. Most new homes have much better insulation than in the past, of so the Radon gas becomes trapped indoors. So in this case the better insulation and sealing actually works against you. What can be done to fix a home with a Radon problem?

There are two basic ways to handle the problem. One of them is to install pipes that suck the Radon gas away from the spaces beneath the foundation and harmlessly expel it to the outside above the roof via an electric fan connected to exterior pipes. Another is to run the pipes inside the house or the garage so that the Radon is expelled outside above the roof. In this case, the electric fan is located in the attic, so the components of the system cannot be seen from the outside of the home. Both of these methods are referred to as Radon reduction or "mitigation" systems. According to Jamey Gelina, a radon specialist with The Air Quality Control Agency, "Radon gas can be reduced to safe levels in practically any home when the proper mitigation techniques are applied."

How do homeowners know whether or not their house is exposed to Radon? That's where Radon testing comes in. Radon occurs all over the United States, so testing should be pretty much mandatory. Testing is fairly simple and can be done by qualified testing services that install a detection device and then examine the results after a few days. This will reliably determine if the Radon levels in a home are high enough to require a Radon mitigation system. About one in every 15 homes in the US has excessive Radon levels, and Radon testing is mandatory in many states when you buy or sell a home. Even if it's not, given the potential health risks, it's foolish not to test one's home.

If testing reveals elevated Radon levels, a Radon mitigation system must be installed. Installation isn't difficult and it's a proven and effective technology, but it must be done right. There are many qualified mitigation system installers with certified and licensed technicians, so pick someone who's been in the business for a while to remove this potentially deadly thread from your home.
Back to Denver Radon Tests

Radon Mitigation

Denver's Best Radon Mitigation company is surely A 2 Z Radon Mitigation. They are located in Lakewood and offer radon mitigation, radon removal from water along with various radon detectors and self tests.

You can find out more about them at www.a2zradon.com